Matting Agent

Matting agent powder is an additive used to reduce surface gloss and achieve a uniform matte finish. It offers good transparency, stable performance, and wide compatibility in coatings, inks, plastics, and leather applications.

Contact Us
·PRODUCT

Product

Solid content

Characteristic & Application range

GD-MT6

≥99%

FH-FT6 is a high-performance, large particle size gel-type silica matting agent. Known for its exceptional transparency, it is extensively used in a wide range of topcoat applications. It is particularly well-suited for thick-coated and pre-coated coil coatings, where it delivers excellent matting efficiency and surface quality.

GD-MT10

≥99%

This product is a composite polyester TGIC outdoor weather-resistant powder coating matting agent, which can provide a minimum gloss of 8%. The coating exhibits excellent leveling and outstanding anti-yellowing properties..

GD-MT11

≥99%

This product is a composite polyester TGIC outdoor weather-resistant powder coating matting agent, which can provide a gloss level below 7%. The coating offers good leveling and excellent anti-yellowing properties, as well as good compatibility with resins.

GD-MT12

≥99

This product is a composite polyester TGIC outdoor weather-resistant powder coating matting agent, which can provide a gloss level below 7%. The coating offers good leveling and excellent anti-yellowing properties, as well as good compatibility with resins. SC12 additive is a wax-free matting agent, making it more suitable for powder coatings used in boiling water resistance and transfer printing applications.

GD-MT68

≥99

Itis a salt formed from cyclic amidine and polybasic acid. It utilizes two different reaction rate groups within the molecular structure to create uneven shrinkage during powder curing, resulting in a matte surface and achieving the desired matting effect for the coating film. It possesses both matting and curing functions.

recommend products

You may also like it

Rheology Modifier(Organoclay)
Organoclay is a specially modified bentonite treated with quaternary ammonium salts. This surface treatment transforms the naturally hydrophilic clay into an organophilic material, making it fully dispersible in organic solvents and resin systems. As a non-reactive rheology modifier, it builds a controllable thixotropic network through particle-particle interaction and swelling. This unique mechanism delivers consistent viscosity, sag control, and anti-settling performance across a wide range of non-aqueous formulations.

More Detail

Rheological Additive(Bentonite)
Bentonite is a high-purity, hydrophilic modified montmorillonite. It is an off-white, non-toxic, soft powder composed mainly of SiO₂ and Al₂O₃. In water, it offers excellent thickening, suspension, and thixotropic properties. It is widely used as a suspending agent and thixotrope in water-based coatings, latex paints, and cosmetics. In coatings, its lamellar structure forms a "card-house" network that prevents settling, controls sagging, and improves storage stability.

More Detail

Dispersant
Poor pigment dispersion can lead to several defects, including flocculation, reduced gloss, color shift, floating/flooding, Benard cells, and settling. To prevent these issues, dispersants are essential. In pigment manufacturing, the smallest units are primary particles. These can form aggregates (tight clumps) or, when combined with aggregates via van der Waals forces, larger agglomerates. The goal of dispersion is to break agglomerates down into primary particles—or at least a stable mix of primary particles and aggregates.

More Detail

Leveling Agent
Surface control additives promote film flow and enable a flat, uniform surface. They are categorized by function into leveling agents, substrate wetting agents, and anti-shrinkage additives.

More Detail

Defoamer
A bubble is a dispersion of a large amount of insoluble gas (usually air) in a small volume of liquid, forming a heterogeneous system with a significant gas-liquid interface. In paints and inks, foam mainly arises from: Air adsorbed by pigment fillers Reaction bubbles during film solidification Mechanical air entrapment in production or application Release of air from porous substrates during coating Surfactants stabilize foam by preventing film thinning through the Marangoni effect and electrostatic forces. In contrast, defoamers work by being incompatible with the system and having lower surface tension, thereby destabilizing and breaking foam. Common defoamers include mineral oil, organosilicon/fluorosilicone, and non-silicon types.

More Detail

Thickener Rheological Additive

More Detail

Wetting Agent
Wetting agents are surface-active additives designed to improve the wetting and spreading of liquids on solid surfaces. They help reduce surface tension, enhance substrate coverage, and improve dispersion of pigments and fillers. Widely used in coatings, inks, and industrial formulations, they ensure better uniformity and application performance.

More Detail

Hangzhou Godoo Tech Co., Ltd. is a professional additives supplier, having our own technical capabilities and control over the production process, dedicated to serving the global paints, coatings,inks, grease, plastics, agrochemical and oil based drilling fields.

Quick Links

Categories

Contact Us

  • No. 28 Qianwang Street, Lin'an District, Hangzhou, Zhejiang, PRC
  • Info@godoo-tech.com
  • +86-19706876889
  • Mon - Fri: 9:00 - 18:00

© 2026 Hangzhou Godoo tech. Co., Ltd.. All rights reserved.

Privacy Policy Terms of Service Sitemap
Powerby Feedback Follow Data