Dispersant

Poor pigment dispersion can lead to several defects, including flocculation, reduced gloss, color shift, floating/flooding, Benard cells, and settling. To prevent these issues, dispersants are essential.
In pigment manufacturing, the smallest units are primary particles. These can form aggregates (tight clumps) or, when combined with aggregates via van der Waals forces, larger agglomerates. The goal of dispersion is to break agglomerates down into primary particles—or at least a stable mix of primary particles and aggregates.

·PRODUCT

Product	System*	Active component	Solid content	Solvent	Characteristic & Application range
GD-DP35	S	High polymer block polymer of polyester structure	40%	EGDA	• It has excellent dispersion effect on various organic pigments and carbon black, and is also suitable for dispersion stability of inorganic pigment fillers. • Polyester modified hyperdispersant, suitable for high polarity systems such as PU, NC, PE, epoxy, UV, paint and coil coatings, the versatility is very wide.
GD-DP37	S/W	High polymer containing pigment group	50%	S-150B	• It has excellent dispersion effect on various organic pigments and carbon black. • Suitable for PU, NC, PE, UV, baking paint and coil paint, especially recommended for automotive repair paint, but also suitable for high-end water-based industrial paint and water-based general color paste.
GD-DP29	W	Polymer polyurethane with pigment affinity groups	40%	Water	• The new generation water-based anti-settling dispersant containing multiple anchoring groups has strong versatility and good water resistance, and has excellent dispersion effect on organic pigments, carbon black and inorganic pigment fillers. • The prepared paste has good viscosity reduction effect, thixotropy, and excellent anti-sinking and anti-water separation effect. • It is suitable for all kinds of water-based industrial paints, water-soluble and water-dispersed paints, and can also be used for the preparation of water-based universal colorants with strong versatility. • Suitable for dispersion and stability of water-based aluminum silver paste and pearlite powder.
GD-DP98	W	Polymer polyurethane with pigment affinity groups	40%	Water	• It is suitable for the dispersion stability of various pigments, especially for the dispersion effect of organic pigments and carbon black. • The product has less hydrophilic groups than other dispersants and has little influence on the water resistance of the paint film. • It is suitable for water-based system, water-soluble resin system, etc., especially for the preparation of resin-free color paste and water-based universal color paste.

Wetting dispersants

Product	System*	Active component	Solid content	Solvent	Characteristic & Application range
GD-WD03	S	Carboxylic acid amine salt	50%	EGDA	• It has good dispersing and stabilizing effect on various inorganic pigment fillers. • It can also be used for the preparation of organobentonite pre-gel. • Extremely versatile, cost-effective, suitable for all kinds of primer and low-end requirements of the top paint.
GD-WD04	S	Solution of polymer polycarboxylic acid and polysiloxane	50%	BCS/S-150B /Isophorone	• Controlled flocculation dispersant, suitable for all kinds of solvent-based coating system, to prevent floating color, better use with other dispersants. • Has a strong ability to control the anti-floating color, can be added before or after the addition, especially for the floating white has a more obvious effect. • It is recommended to add 0.1-0.4% to the total formula, the addition of too much may affect the gloss, leveling, and may have side effects such as thickening and bubble stabilization.
GD-WD11	S	Polyester phosphate	52%	EGDA/S-150B	• Strong deflocculating dispersant, has excellent viscosity reduction and dispersion ability for various inorganic pigment fillers such as titanium dioxide, matting powder, iron oxide and various fillers. • Excellent viscosity reduction effect, improve the leveling, gloss and fullness of the system. • Wide versatility, suitable for all kinds of solvent-based systems.
GD-WD24	S	Alkyl ammonium salt solution of polycarboxylic acid	50%	BCS/S-150B	• The controlled flocculation dispersant forms a bridge between pigment particles through hydrogen bonding, and has the function of preventing floating color, settling and current hanging. • Suitable for medium and low polarity solvent-based and solvent-free coating systems, especially recommended for anti-corrosion primers, mixed paints, PCB inks. • Wide versatility, suitable for all kinds of fillers, also suitable for activated organic bentonite.
GD-WD41	S	High polymer with pigment affinity groups	50%	EGDA	• It has excellent dispersion effect on organic pigment, inorganic pigment filler and matting powder. • It is suitable for all kinds of solvent-based coating system, especially for wood paint, coil paint and anti-corrosion paint, industrial paint, automobile repair paint. • Wide versatility, high cost performance, good compatibility. • Excellent ability to control floating color.
GD-WD80	S	High molecular polymer with pigment affinity groups	80%	Aliphatic hydrocarbon environmental solvent	• It is suitable for the dispersion of organic pigments and carbon black, and also suitable for the dispersion of inorganic pigments and organic bentonite. • Especially suitable for low polarity systems (low polarity aliphatic solvent-based), such as petroleum resin, hydrocarbon resin, alkyd, chlorinated rubber, etc. • It is suitable for the manufacture of low polarity resin masterbatch and the preparation of plasticizer color paste.

Wetting dispersants

Quick Links

Categories

Contact Us